WEA453e Installation Manual
Fixing Pressure Terminal (Handheld Compressor)
1) Insert the conductor of the cable with the sheath stripped to the internal end of pressure
terminal.
For a ring type pressure terminal, push it in until the conduct comes out 1 mm from the
end of the terminal.
2) From the holes of handheld compressor, select one that fits to the pressure terminal.
3) Insert the pressure terminal to the selected hole.
4) Fix the pressure terminal and cable temporarily so the position can be changed later by
pressing the compressor.
Samsung Electronics America
Figure 78. Fixing Pressure Terminal_Handheld Compressor (1)
Figure 79. Fixing Pressure Terminal_Handheld Compressor (2)
Figure 80. Fixing Pressure Terminal_Handheld Compressor (3)
Version 1.0
Page 107 of 117