Table of Contents
Advertisement
To check, edit or erase the programmes
1 Press VCR.
2 Press TIMER.
5
3 Press PLAY
or STOP
"PROGRAM REVIEW", then press OK/
STATUS.
4 Press OK/STATUS repeatedly to view the more
detailed programme information.
• When you press the button for the first time, the
detailed programme information for Programme 1
appears. By pressing this button repeatedly, you can
review the detailed information of all other
programmes.
5 If you want to change the programme setting
shown on the TV screen, press the following
buttons:
5
∞
CH
/
: Changes the channel.
START +/– :Changes the start time.
STOP +/–
:Changes the stop time.
SPEED
:Changes the tape speed.
DATE +/–
:Changes the date.
If you want to erase the programme setting
shown on the TV screen, press CLEAR. The
detailed information of the next programme
appears.
6 If necessary, press TIMER to exit from the menu
operations.
Note:
• This function does not work for OTR (One Touch
Recording).
How to see the programme list
1
Programme numbers
2
Preset channel numbers
3
Start time
4
Stop time
5
Start date
"D" stands for "DAILY," and
"W" stands for "WEEKLY."
• If the programme has worked once for the Daily
recording, "DAILY" will be shown instead of the
start date.
• If the programme has worked once for the
Weekly recording, the day of the week (in this
example, "MON") will be shown instead of the
start date.
Note:
• Even if a power failure occurs, the VCR keeps your
timer programs. However, the clock time and other
menu settings are lost if it lasts for more than 3
minutes. As a result, when the power is supplied
again to this VCR after the power failure, set the
clock time and turn off the VCR.
Each timer program you have made will start unless
its start time already passes.
∞
to select
1
2
3
4
PR CH START STOP DATE
1
12 20:00
22:00 W10/06
2
25 10:00
10:45
MON
3
03 15:00
15:15 D16/10
4
45 23:30
23:00 DAILY
5
6
7
8
NEXT: OK
END: TIMER
Tape Duplication
Dubbing from any VCR (or camcorder) to another is
simple.
Explanations on this page uses this VCR as the
recording VCR.
Refer also the manual supplied with the other VCR
(for playback)
1
Connect the recording VCR (this VCR) and
the playing VCR.
2
Connect the recording VCR (this VCR) to the
TV.
Playing VCR
ANT.IN
IN
OUT
AUDIO
VIDEO
RF OUT
1 Insert a source tape in the playing VCR and a
blank tape in the recording VCR.
• If a tape without the record tab is inserted in the play
ing VCR, playback automatically starts. In this case,
press the STOP button.
2 Turn the channel on the TV to your video
channel.
5
5
3 Press CH
or
control at this VCR, to select the external line
input.
• For rear jacks, select "L-1" on the display or "A/V IN"
on the TV screen.
• For front jacks, select "L-F" on the display or "F-A/V
IN" on the TV screen.
4 Press ALT/SPEED, pointing the remote control at
this VCR, until the desired tape speed (SP, LP or
SLP) appears on the display.
SP, LP: For PAL signal.
SP, SLP: For NTSC signal.
5 Press the PLAY
6 Press REC/OTR
Remember: press the buttons in steps 5 and 6 simultane-
ously to avoid missing any of the recording.
14
Recording VCR (this VCR)
ANT.IN
To RF OUT
IN
OUT
AUDIO
VIDEO
RF OUT
From Audio output to AUDIO IN
From Video output to VIDEO IN
∞
, pointing the remote
3
button on the playing VCR.
at this VCR.
Advertisement
Table of Contents
