Table of Contents
Advertisement
4 Press MENU.
The message on the right will
appear.
3
Select TV System
1 Press OK/STATUS. The TV
system selecting menu appears
on the TV.
5
2 Press PLAY
or STOP
to select the appropriate TV
system of your residential area.
B/G: For West Europe, ASEAN countries,
Australia, New Zealand.
D/K: For China, Russia, East Europe.
I: For Hong Kong, South Africa,
United Kingdom.
4
Start Auto Programming
Press OK/STATUS. Auto prog-
ramming starts and the message on
the right appears on the TV.
When the auto programming
is completed
The message on the right appears
on the TV, and the lowest channel
will be tuned in.
5
∞
Press CH
or
to change
channels on the VCR.
You have now completed the initial
setting.
If you stop the initial setup procedure while it is
proceeding:
The VCR enters the initial setup mode again the next
time you turn on the VCR.
Initial setup will not start in the following cases:
• If there is a tape inserted.
• If any of the initial setup procedures is finished
manually.
To Reset the Time or Language
You can always change the time and language
setting after you completed the initial set up.
1 Press VCR.
2 Press MENU.
5
3 Press PLAY
or STOP
to select "INITIAL SET UP"
then press OK/STATUS.
CONNECT ANTENNA OR CABLE
TO VCR FOR AUTO CH. SET
READY: OK
END: MENU
SYS COUNTRY
B/G W.EUR. ASEAN AUST.
NZ
D/K CHINA RUS. E.EUR.
I
HK S.AF. UK
∞
SELECT:
CONFIRM: OK
END: MENU
AUTO CH. SET PROCEEDING
PLEASE WAIT
START
FINISH
AUTO CH.SET COMPLETED
∞
VCR SET UP
TUNER SET UP
INITIAL SET UP
SELECT:
CONFIRM: OK
END: MENU
5
4 Press PLAY
or STOP
to select "SET CLOCK" or
"LANGUAGE", depending
on which setting you want
to change.
5 To change clock/date:
Repeat step 2 (Setting the Clock/Date) of
"Initial Set Up" on page 5.
To change language:
3
Press FF
repeatedly to choose your preferred
language English or
6 Press MENU to exit.
To Reset the Channels
If you want to re-do the auto programming, follow
the procedure below;
1 Press VCR.
2 Press MENU.
5
3 Press PLAY
or STOP
to select "TUNER SET UP"
then press OK/STATUS.
5
4 Press PLAY
or STOP
to select "AUTO TUNER SET
UP" then press OK/STATUS.
5
5 Press PLAY
or STOP
to select the appropriate TV
system [(BG, DK, I)] of your residential area.
6 Press OK/STATUS. Auto programming starts.
When it ends, programmed channels, frequencies
and TV systems are shown on the display.
7 Press MENU to exit.
To Delete or Edit Receivable Channels
1 Press VCR.
2 Press MENU.
5
3 Press PLAY
or STOP
"TUNER SET UP", then press OK/STATUS.
5
4 Press PLAY
or STOP
"CHANGING TUNER SET UP", then press OK/
STATUS. The programmed
channel information list
appears.
5
5 Press PLAY
or STOP
until the desired channel
setting flashes.
5.1: TO DELETE UNWANTED CHANNELS:
Press CLEAR. Repeat this step until you delete
all unwanted channels.
6
∞
CLOCK
LANGUAGE
ENGLISH
SELECT:
CHANGE:
END: MENU
.
VCR SET UP
TUNER SET UP
∞
INITIAL SET UP
SELECT:
CONFIRM: OK
END: MENU
∞
CHANGING TUNER SET UP
AUTO TUNER SET UP
∞
SELECT:
CONFIRM: OK
END: MENU
∞
to select
∞
to select
CH FRQ SYS CH FRQ SYS
01 150 BG
07 229 BG
02 165 BG
08 237 BG
03 195 BG
09 355 BG
04 205 BG
10 365 BG
∞
05 213 BG
11 374 BG
06 221 BG
12 384 BG
SELECT:
DELETE: CLEAR
CHANGE CH: OK
END: MENU
Advertisement
Table of Contents
