Table of Contents
Advertisement
O
perating TV
O
1
Set Code
1 Press and hold TV.
2 Press two Number buttons for the manufactur-
er's code number of your TV, referring to the
table to the right.
• For example, for 02, press 0 then 2.
7
3 Press STOP
, then release TV.
• The remote control can now operate the TV of the
selected code.
2
Confirm Setting
Press POWER, pointing the remote control at the
TV.
If the TV turns on or off, your setting is completed.
If not, repeat steps above, using another code.
Notes:
• After replacing the batteries, you need to reset the
manufacturer's code again.
• The buttons you can use to operate your TV are
explained on page 3.
B
efore
R
equesting
B
R
Power
No power.
Recording & Playback
TV programme cannot be recorded.
Timer recording cannot be performed.
There is no playback picture, or the playback
picture is noisy or contains streaks.
During a still or slow motion picture, the
picture may contain some vertical jitter when
using a TV which has an automatic vertical
hold control.
If the top of your playback picture waves
back and forth excessively.
During playback, "USE CLEANING
CASSETTE" appears on the screen.
S
ervice
S
Correction
• Check that the AC power cord is correctly connected
to an AC outlet.
• Check that the VCR is turned on.
Correction
• Check the connections between the VCR, the antenna
and the TV.
• Make sure that the record tab on the back of the
cassette is not removed.
• Set the timer on-time and timer off-time correctly.
• Make sure that the VCR is turned off after setting is
made.
• Timer recording may not be performed or stopped if a
power interruption occurs before or during timer
recording.
• Select your video channel correctly.
• Adjust the tracking slowly in either direction.
• Try to change to another tape, you may not have this
problem.
• Because the VCR playback signal is not as stable as
an off-the-air TV signal, the top of your TV screen
may be bent or unstable during playback. You may
have better result if the A/V input is used.
• The video heads are dirty. Use a head cleaner.
15
TV Manufacturers' Codes
PHILIPS
EMERSON
GOLDSTAR
GRUNDIG
HITACHI
JVC
MITSUBISHI
PANASONIC
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
ZENITH
01, 02, 03
14
04
24, 25
12
05
13, 26
07, 17, 19, 20
10
18
11
16
09
21, 22, 23
08
06, 15
Advertisement
Table of Contents
