Table of Contents
Advertisement
One Touch Recording (OTR)
The OTR function lets you quickly specify how
long you want a recording to continue. You do not
have to programme the timer.
1
On TV
1 Turn on the TV.
2 Select the video channel (or AV mode).
2
On VCR
Insert a cassette with the record tab in place.
The VCR turns on.
• If a cassette is already in the VCR, turn on the
VCR.
3
Select Channel
5
∞
Press CH
or Number buttons to select the
or
channel to record.
4
Start OTR
Press REC/OTR
twice.
Recording starts immediately, and the
indicator lights up and blinks on the display.
This indicates that the VCR
will automatically shut off after
30 minutes of recording.
5
Select Recording Length
Press REC/OTR
repeatedly until the desired
recording length appears.
Each time you press the button, recording length
increases in 30-minute intervals.
=
=
=
0:30
1:00
1:30
REC (Normal recording)
To check time remaining during an OTR
Press OK/STATUS.
To change the recording length during an OTR
Press REC/OTR
repeatedly until the desired
length appears.
(Record)
OTR(0:30)
CH12
SP
=
.....
5:30
6:00
+ + + + +
7
To cancel an OTR
Press STOP
to stop recording before the preset
recording length is reached.
If you want to cancel the OTR mode but continue
recording, press REC/OTR
"OTR" changes to "REC" on the TV screen.
Notes:
• During recording, the displayed time counts down.
When "0:00" is reached, recording stops and the
VCR turns off automatically.
• If an OTR is engaged during pause, the displayed
time counts down normally, but recording does
not begin until you cancel the pause.
Using On-Screen Display
You can display the VCR operating status on the
TV screen.
1
Select VCR Set Up Mode
1 Press VCR.
5
2 Press MENU.
3 Press PLAY
or STOP
UP" then press OK/STATUS.
2
Select On-Screen Mode
5
1 Press PLAY
or STOP
3
SCREEN MODE".
2 Press FF
. Each time you press the button, the
setting changes.
ON:
When you press a tape running button (Stop,
Play, etc.), the VCR status appears for 5
seconds.
COUNTER:
When you press a tape running button, the VCR
operating status appears for 5 seconds.
After 5 seconds, the VCR status disappears
except the time counter.
OFF:
The VCR operating status does not appear even
if you press a tape running button.
3
Finish Setting
Press MENU.
To display the VCR status on the TV screen
manually, press OK/STATUS. The VCR status
appears for about 5 seconds.
• If "ON SCREEN MODE" is set to "OFF," no
VCR status appears though you press OK/
STATUS.
11
several times until
∞
to select"VCR SET
∞
to select "ON
Advertisement
Table of Contents
