Table of Contents
Advertisement
B
efore
R
equesting
B
R
Remote Control
The remote control cannot work.
Miscellaneous
A cassette cannot be inserted.
The cassette does not eject.
The cassette ejects when you press REC/OTR
S
pecifications
S
G e n e r a l
G e n e r a l
G e n e r a l
Mains voltage
Mains frequency
Power consumption
Ambient temperature
Relative humidity
Dimensions (WxHxD)
Mass
Position for use
Video output channel
Possible number of TV channel
Number of pre-programmable memory blocks
Number of days in advance
T u n e r
T u n e r
T u n e r
Video signal
VHF
VHF H
UHF
V i d e o
V i d e o
V i d e o
Input (VIDEO IN)
Output (VIDEO OUT)
Resolution
Signal/noise ratio
A u d i o
A u d i o
A u d i o
Input (AUDIO IN)
Output (AUDIO OUT)
A c c e s s o r i e s s u p p l i e d
A c c e s s o r i e s s u p p l i e d
A c c e s s o r i e s s u p p l i e d
S
ervice (continued)
S
• Aim the remote control directly at the remote sensor
on the VCR.
• Avoid all obstacles which may interfere with the
signal path.
• Inspect or replace the batteries.
• Make sure batteries are inserted correctly.
• Insert the cassette with the window side up and the
record tab facing you.
• Check that a cassette tape is not already inserted. Press
0
• Check that the AC power cord is correctly connected
to an AC outlet.
.
• Check that the record tab on the back of the cassette is
not removed.
16
Correction
Correction
EJECT.
AC 110 V – 240 V
50 Hz/60 Hz
Approx. 14W
+5 °C to +40 °C
10 % to 80 %
Approx. 360 mm x 94 mm x 249 mm
Approx. 3.0 kg
Horizontal
UHF E36 (adjustable betweeen E28 — E60)
99
8
365 or every day, or every week
B/G, D/K, I, SECAM K1
42 MHz — 175 MHz
175 MHz — 470 MHz
470 MHz — 870 MHz
CATV
0.5 V(p-p) to 2.0 V(p-p), 75 ohms
1.0 V(p-p) ±0.2 V(p-p), 75 ohms
Better than 240 lines
Better than 43 dB
–8 dBs, 50 k ohms (0 dBs=0.775 Vrms)
–8 dBs, 1 k ohms (0 dBs=0.775 Vrms)
Remote control unit
RF coaxial cable
Batteries – R6(SUM-3)/AA
(only for checking operations)
Advertisement
Table of Contents
