Table of Contents
Advertisement
CT1703, CT1707, CT2146, CT1702, CT2886
To reduce the risk of injury, all operators and maintenance personal must read and
understand the instructions before operating, changing accessories, or performing
maintenance on there products. All possible solution can not be covered in these
instructions. Care must be exercised by everyone using or maintaining.
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.UNITED KINGDOM
MODEL NO.:
VIBRATORY PLATE
PETROL COMPACTOR
ORICINAL INSTRUCTIONS
WARNING
Advertisement
Table of Contents
Related Manuals for Neilsen CT1703
Summary of Contents for Neilsen CT1703
- Page 1 MODEL NO.: CT1703, CT1707, CT2146, CT1702, CT2886 VIBRATORY PLATE PETROL COMPACTOR ORICINAL INSTRUCTIONS WARNING To reduce the risk of injury, all operators and maintenance personal must read and understand the instructions before operating, changing accessories, or performing maintenance on there products. All possible solution can not be covered in these instructions.
-
Page 2: Table Of Contents
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. PETROL COMPACTOR Product description: Model: CT1703 CT1707 CT2146 CT1702 CT2886 Appropriate EC directives: EC-Machinery Directive 2006/42/EC EC-Directives on noise emission in the environment by equipment for... -
Page 3: Instruction
1. INSTRUCTION THANKS FOR YOUR SLECTION OF OUR PRODUCTS. WITH THE TECHNOLOGY INTRODUCTED FROM JAPAN, THIS SERIES OF PRODUCTS HAVE THE ADVANTAGES OF SMALL VOLUME, LIGHT WEIGHT, GRACE APPERANCE AND DURABLE MECHANICAL STRUCTURE. GENERAL SAFETY INSTRUCTIONS FOR THE OPERATION OF POWER EQUIPMENT OUR GOAL IS TO SUPPLY LIGHT CONSTRUCTION MACHINERY THAT HELPS OPERATOR WORK SAFETY AND EFFICIENTLY. -
Page 4: Accessories
THE SET SCREWS WHICH BEAR AGAINST THE MOTOR CRANKCASE TO ACHIEVE THE REQUIRED BELT TENSION. ENSURE THAT FOUR NUTS AND THE SET SCREW LOCKNUTS ARE TIGHTENED AFTER ADJUSTMENT. 4. ACCESSORIES TRANSPORT TROLLEY – FACILITATES HANDLING, HOOKS INTO THE BASE-PLATE. FITTED WITH 200MM RUBBER TYPES. WATER TANK KIT –... - Page 5 ENSURE THAT THE AREA TO BE COMPACTED DOES NOT CONTAIN ANY “LIVE” ELECTRICAL CABLES, GAS, WATER OR COMMUNICATIONSERVICE’S WHICH MAY BE DAMAGED BY THE ACTION OF THE VIBRATION. EXERCISE CARE WHEN OPERATING UNIT, EXPOSURE TO VIBRATION OR REPETITIVE WORK ACTIONS MAY BE HARMFUL TO HANDS AND ARMS NEVER STAND ON THE UNIT WHILE IT IS OPERATING.
-
Page 6: Inspection & Operation
DO NOT OPERATE OR REFUEL A PETROL OR DISEAL MOTOR IN A CONFINED AREA WITHOUT ADEQUATE VENTILATION. CARBON MONOXIDE EXHAUST GASES FROM INTERNAL COMBUSTION MOTOR DRIVEN UNITS CAN CAUSE DEATH IN CONFINED SPACES. NOISE HAZARDS EXCESSIVE NOISE CAN LEAD TO TEMPORARY OR PERMANENT LOSS OF HEARING. - Page 7 WHERE POSSIBLE THE SITE SHOULD BE GRADED AND LEVELLED BEFORE COMMENCING COMPACTION. CORRECT MOISTURE CONTENT IN SOIL IS VITAL TO PROPER COMPACTION. WATER ACTS AS A LUBRICANT TO HELP SLIDE SOIL PARTICLES TOGTHER. TOO LITTLE MOISTURE MEANS INADEQUATE COMPACTION ; TOO MUCH MOISTURE LEAVES WATER-FILLED VOIDS THAT WEAKEN THE SOIL’S LOAD-BEARING ABLITY.
- Page 8 PLS READ THE ATTACHED INSTRUCTION MANUAL FOR DIESEL (GASOLINE) ENGINE MOTOR CAREFULLY BEFORE USING...
-
Page 11: Maintanence & Service
7. MAINTENANCE & SERVICE... -
Page 13: Specifications
8. SPECIFICATION CT1707 CT2886 MODEL NO. CT1703 CT1702 CT2146 PLATE SIZE(MM) 620*450 410*280 510*350 550*410 （approx.） WEIGHT (KG) 32.5 62/64 WALKING SPEED 20-25 20-25 20-25 20-25 (M/MIN)(approx.) IMPACT FORCE 1300 1030 1210 1550 (KG)(approx.) 2.4HP 6.5HP 6.5HP 6.5HP POWER SOURCE... -
Page 14: New Hand Mounting（If Applicable
10. NEW HAND MOUNTING（IF APPLICABLE）...