Cfd Configuration Example - HP A5830 series Configuration Manual

To do...
• Display MD
configuration information
•
Display MA
configuration information
• Display service instance
configuration information
• Display MEP list in a
service instance
•
Display MP information
• Display the attribute and
running information of
the MEPs
• Display LTR information
received by a MEP
• Display the information
of a remote MEP
• Display the content of the
LTR messages received
as responses to the
automatically sent LTMs

CFD configuration example

Network requirements
As shown in
The network comprises five devices and is divided into two MDs: MD_A (level 5) and MD_B (level
•
3). All ports belong to VLAN 100, and the MAs in the two MDs all serve VLAN 100.
MD_A has three edge ports: GigabitEthernet 1/0/1 on Device A, GigabitEthernet 1/0/3 on
•
Device D, and GigabitEthernet 1/0/4 on Device E, and they are all inward-facing MEPs. MD_B
has two edge ports: GigabitEthernet 1/0/3 on Device B and GigabitEthernet 1/0/1 on Device D,
and they are both outward-facing MEPs.
In MD_A, Device B is designed to have MIPs when its port is configured with low level MEPs. Port
•
GigabitEthernet 1/0/3 is configured with MEPs of MD_B, and the MIPs of MD_A can be
configured on this port. Configure the MIP generation rule of MD_A as explicit.
The MIPs of MD_B are designed on Device C, and are configured on all ports. Configure the MIP
•
generation rule as default.
Use the command...
display cfd md [ | { begin | exclude |
include } regular-expression ]
display cfd ma [ [ ma-name ] md { md-
name | level level-value } ] [ | { begin |
exclude | include } regular-expression ]
display cfd service-instance [ instance-id ] [
| { begin | exclude | include } regular-
expression ]
display cfd meplist [ service-instance
instance-id ] [ | { begin | exclude |
include } regular-expression ]
display cfd mp [ interface interface-type
interface-number ] [ | { begin | exclude |
include } regular-expression ]
display cfd mep mep-id service-instance
instance-id [ | { begin | exclude | include
} regular-expression ]
display cfd linktrace-reply [ service-
instance instance-id [ mep mep-id ] ] [ | {
begin | exclude | include } regular-
expression ]
display cfd remote-mep service-instance
instance-id mep mep-id [ | { begin |
exclude | include } regular-expression ]
display cfd linktrace-reply auto-detection [
size size-value ] [ | { begin | exclude |
include } regular-expression ]
8:
Figure
30
Remarks
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view
Available in any view