Configuring Mip Generation Rules - HP A5830 series Configuration Manual

To do...
• Configure a MEP list
• Enter Layer 2 Ethernet
interface view
• Create a MEP
• Enable the MEP
You cannot create a MEP if the MEP ID is not included in the MEP list of the service instance.

Configuring MIP generation rules

As functional entities in a service instance, MIPs respond to various CFD frames, such as LTM frames,
LBM frames, 1DM frames, DMM frames, and TST frames.
MIPs are automatically generated on each port according to related MIP generation rules. If a port has
no MIP, the system will check the MAs in each MD (from low to high levels) and follow the procedure
described in
Figure 7 Procedure for creating MIPs
You can choose appropriate MIP generation rules based on your network design.
To configure the rules for generating MIPs:
To do...
•
Enter system view
Use the command...
cfd meplist mep-list service-
instance instance-id
interface interface-type interface-
number
cfd mep mep-id service-instance
instance-id { inbound | outbound
}
cfd mep service-instance instance-
id mep mep-id enable
Figure 7 to create or not to create MIPs (within the same VLAN):
Use the command...
system-view
Remarks
Required
By default, no MEP list is
configured
—
Required
Not configured by default
Required
Disabled by default
Remarks
—
27