HP A5830 series Configuration Manual page 175

Configure VRRP on Switch B.
5.
# Create VRRP group 1, and configure the virtual IP address of the group as 192.168.0.10.
<SwitchB> system-view
[SwitchB] interface vlan-interface 2
[SwitchB-Vlan-interface2] vrrp vrid 1 virtual-ip 192.168.0.10
[SwitchB-Vlan-interface2] return
Verify the configuration.
6.
# Display the detailed information of the VRRP group on Switch A.
<SwitchA> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
Preempt Mode
Auth Type
Virtual IP
Virtual MAC
Master IP
VRRP Track Information:
Track Object
# Display the information of track entry 1 on Switch A.
<SwitchA> display track 1
Track ID: 1
Status: Positive
Duration: 0 days 0 hours 0 minutes 32 seconds
Notification delay: Positive 0, Negative 0 (in seconds)
Reference object:
BFD session:
Packet type: Echo
Interface : Vlan-interface2
Remote IP : 1.1.1.2
Local IP : 1.1.1.1
# Display the detailed information of the VRRP group on Switch B.
<SwitchB> display vrrp verbose
IPv4 Standby Information:
Run Mode
Run Method
Total number of virtual routers : 1
Interface Vlan-interface2
VRID
Admin Status
Config Pri
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 110 Running Pri
: Yes Delay Time
: None
: 192.168.0.10
: 0000-5e00-0101
: 192.168.0.101
: 1 State : Positive
: Standard
: Virtual MAC
: 1 Adver Timer
: Up State
: 100 Running Pri
175
: 1
: Master
: 110
: 0
Pri Reduced : 20
: 1
: Backup
: 100