Suzuki Liana RH418 Supplementary Service Manual page 297

7) Warm up transmission fluid temperature sensor (2).
Check resistance between terminals of A/T side
valve body connector. Thus make sure its resistance
decrease with the increase of temperature.
After inspection, install transmission fluid temp.
sensor and connect valve body connector.
Transmission fluid temperature sensor
resistance (Temperature: Resistance)
10 °C (50 °F): 5.8 – 7.1 kΩ
110 °C (230 °F): 231 – 263 Ω
145 °C (293 °F): 105 – 117 Ω
8) Clean mating surface of A/T side cover and A/T
case.
9) Apply sealant to mating surface of A/T side cover
and A/T case by using a nozzle, referring to
"Automatic Transaxle Unit Assembly".
: Sealant 99000–31230
10) Install transaxle side cover (1).
NOTE
Apply sealant to 2 bolts (2).
"A": Sealant 99000–31230
Tightening torque
Transaxle side cover bolt (a): 24 N·m (2.4 kgf-m,
17.5 lb-ft)
2, "A", (a)
(a)
11) Install A/T fluid cooler pipe (1).
Tightening torque
A/T fluid pipe union bolt (color: green) (a): 27
N·m (2.7 kgf-m, 19.5 lb-ft)
A/T fluid pipe union bolt (color: silver) (a): 35
N·m (3.5 kgf-m, 25.5 lb-ft)
A/T fluid pipe nut (b): 18 N·m (1.8 kgf-m, 13.0 lb-
ft)
NOTE
Make sure to use new gaskets (2) for A/T fluid
pipe union bolt.
I3RH0B510026-01
12) Install A/T fluid cooler hoses.
13) Pour A/T fluid referring to "A/T Fluid Change".
14) Verify that there is no A/T fluid leakage.
Automatic Transmission/Transaxle:
(a)
1
2, "A", (a)
(a)
5A-71
I2RH01510066-01
I3RH0B510009-01