Omron F3SG series User Manual page 249

Smart Muting Actuator
Appearance
Spatter Protection Cover (two pieces per set, common for emitter/receiver)
Appearance
Control Unit
Appearance
Control Unit
Appearance
Model
F3W-MA0100P Applicable to PNP-output devices. Refer to Smart Muting Actuator
F3W-MA0300P F3W-MA Series User's Manual for details.
Model
F39-HGA For the F3SG-R of the protective height of 2,000 mm or longer, use
(for F3SG-RA) two Spatter Protection Covers of different lengths.
F39-HGB Please note the following:
(for F3SG-RE) • The operating range of the F3SG-R attached with the Spatter
Protection Cover is 10% shorter than the rating.
• The Spatter Protection Cover extends over the DIP Switch cover
of the F3SG-RA. Be sure to use the Spatter Protection Cover
only after all required settings are made to the DIP Switch.
Model
G9SA-301 Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Model
G9SA-301-P Safety output (relay): NO
contact x 3
Auxiliary output (relay): NC
contact x 1
Remarks
Remarks
Output
• An F39-JGA Single-Ended
Cable is required.
• An F3SG-R with PNP output can
be connected.
• A type of 5 N.O. and 1 N.C.
contacts is also available.
Output
• An XS5F-D421-80-F Round
Water-resistant Connector is
required.
• An NPN type of F3SG-R can be
connected.
Appendix
Remarks
Remarks
F3SG-R
225
User's Manual
E