Omron F3SG series User Manual page 233

When muting function setting is changed, a muting sensor must be installed so that muting state
should not occur when a human body enters a hazardous zone of a machine.
When muting function setting is changed, a muting sensor must consist of 2 independent devices.
When the configuration of the cascade connection is changed, either of the following is attached on
a secondary sensor farthest from its power supply:
- End Cap
- Lamp (F39-LP and F39-BTLP, sold separately)
- Bluetooth ® Communication Unit (F39-BT, sold separately)
When using PNP output, 0 V line of the power supply is grounded. When using NPN output, +24 VDC
line of the power supply is grounded.
Wiring must not be bent, cracked, nor damaged.
Checklists
E
F3SG-R
209
User's Manual