Setting State - Omron F3SG series User Manual

System Operation and Functions

2-2-6. Setting State

The two receiver safety outputs are in the OFF state, the green Power indicator of the emitter is
blinking. The blue Top-beam-state indicator, green Configuration indicator, red Lockout indicator, green
Stable-state indicator and green ON/OFF indicator of the receiver are blinking. The Setting state does
not allow the protected machine to operate. The user can change settings of the functions, monitor the
operating states or view maintenance information with the Configuration Tool (SD Manager 2) under
this state.
The F3SG-RE does not have the Setting state.
Refer to Safety Light Curtain Configuration Tool for Model F3SG (SD Manager 2) User's Manual for more
information.
F3SG-R
24
User's Manual