Department Report Format; Hourly Report - Sharp UP-3500 Instruction Manual

I I I I I Department report format
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [REPORT] button to display the menu, and touch the [DEPT. RPT FORMAT] button to
program details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
CUSTOMER COUNTER
I I I I I Hourly report
(1) Select the PGM2 mode and touch the [SETTING] to perform the programming.
(2) Touch the [REPORT] button to display the menu, and touch the [HOURLY REPORT] button to program
details.
(3) Touch the required programming item, and enter or select each parameter and touch the [ENTER] key.
Repeat this step (3) satisfactorily.
(4) To terminate the programming, touch the [EXIT] key.
Text
MEMORY TYPE
START TIME
(REPORT ➝ DEPT. RPT FORMAT ....... PGM2)
SKIP:
NOT SKIP:
(REPORT ➝ HOURLY REPORT ....... PGM2)
Memory type;
15MIN: 15-minute type
30MIN: 30-minute type
60MIN: 60-minute type
Starting time: max. 2 digits (0 to 23)
Parameter
Parameter
269