Using Additional Telephones (Easylink) - Philips PPF 695 User Manual

Using Additional Telephones
(Easylink)
Easylink
With the Easylink function you can control your device
with additional telephones. To use this function, addition-
al telephones must be set to the tone dialling mode (DT-
MF/MFV tones) (for this purpose see the operating man-
ual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you are
receiving a fax (whistling tone or silence), you can start the
fax reception by pressing *5 on the additional tele-
phone or pressing START on the device.
Taking Over the Line
If you pick up on an additional telephone and the machine
continues to ring or attempts to receive a fax, you can dis-
connect the machine from the line. Press ** on the
additional telephone.
Changing Code
Easylink Codes
Only change the codes if it is absolutely necessary.
The codes must begin with * or # and must be
different.
1 Press OK, 54 and OK.
2 Enter the new code for starting fax reception.
3 Confirm with OK.
4 Enter the new code for taking over the line on an addi-
tional device.
5 Confirm with OK.
Telephone Lines and Additional Devices
EN
45