Table of Contents
Advertisement
ppf-675-eco-manual-uk-253120913-b.book Seite 31 Mittwoch, 30. September 2009 12:58 12
Connection to the Machine
Connection to the Device
You can connect additional devices directly to your device.
Insert the telephone cable of the additional device into the
EXT socket (RJ-11-connection) on the device.
Connecting Additional Devices
Direct Connection Recommended
Notice
Direct Connection Recommended
We recommend direct connection to the device
because this allows the fax switch to function
optimally and to control the additional devices.
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the device must be
first in the series if multiple devices are connected to the
same telephone socket. Follow the correct order.
Connection to the First Telephone Socket
Notice
Connection to the First Telephone
Socket
If you h ave multiple telephone sockets for the
same telephone line, th e device must be con -
nected to the first telephone socket.
Telephone Lines and Additional Devices · Using Additional Telephones (Easylink)
Using Additional Telephones
(Easylink)
Easylink
With the Easylink fun ction you can control your device
with additional telephones. To use this function, ad di-
tional telephones must be se t to the tone dialling mode
(DTMF/MFV tones) (for this purpose see the operating
manual of your additional telephone).
Starting Fax Reception
If you pick up at an additional device and hear that you are
receiving a fax (whistling tone or silence), you can start the
fax reception by pressing *5 on the additional tele-
phone or pressing START on the device.
Taking Over the Line
If you pick up on an add itional telephone and the device
continues to ring or attempts to receive a fax, you can dis-
connect the device f rom the line. Press ** on the
additional telephone.
Changing Code
Changing Easylink Codes!
CAUTION!
Changing Easylink Codes!
Only change the codes if it is absolutely n eces-
sary. The codes must begin with * or # and
must be different.
1 Press OK, 54 and OK.
2 Enter the new code for starting fax reception.
3 Confirm with OK.
4 Enter the new code for taking over the line on an addi-
tional device.
5 Confirm with OK.
EN
31
Advertisement
Table of Contents
