Easylink; Deregistering; Connecting Additional Devices; Using Additional Telephones (Easylink) - Philips Magic 5 User Manual

De-registering cordless telephone
On the device
1 Press _, 83 and _.
2 Using / select which cordless telephone you are
would like to de-register.
3 Confirm using _. The device disconnects from the
cordless telephone.
On the cordless telephone
1 Press /, and using / select SETTINGS .
2 Confirm using _.
3 Dial using / ADVANCED SET. .
4 Confirm using _.
5 Dial using / SET BASE .
6 Confirm using _.
7 Dial using / DELETE HANDSET .
8 Confirm using _.
9 Using / select which cordless telephone you are
would like to de-register.
10 Confirm using _.
11 Confirm the de-registration with ô Yes . The con-
nection with the device is disconnected.
Registering the cordless telephone with
other devices
You can register a cordless telephone on four different de-
vices (= base units).
On the device
1 Register the cordless telephone with the first device as
described above.
2 Press _, 82 and _ on the next device.
3 Confirm the preset PIN code ( 0000 ) or enter a new
PIN code.
The pin code can be identical with the pin code
on the first device.
4 Confirm using _.
On the cordless telephone
5 Press /, and using / select SETTINGS .
6 Confirm using _.
7 Dial using / ADVANCED SET. .
8 Confirm using _.
9 Dial using / SET HANDSET .
10 Confirm using _.
11 Dial using / PERSON.REGISTR .
12 Confirm using _.
13 Select the next device (= base station) using /.
14 Confirm using _.
15 Confirm the name of the base unit, or enter a new
name.
16 Confirm using _.
17 Enter the same pin code which you entered on the oth-
er device.
18 Confirm using _.
19 Using / select the number with which you would like
to register the cordless telephone on the device.
20 Confirm using _.
Setting the preferred base unit
Preferred base unit
With this function you can specify which device (= base
station) should be used for placing telephone calls if you
have registered your cordless telephone with multiple de-
vices. When you select AUTO , the cordless telephone auto-
matically connects to the device that is within the range.
1 Press /, and using / select SETTINGS .
2 Confirm using _.
3 Dial using / ADVANCED SET. .
4 Confirm using _.
5 Dial using / SET HANDSET .
6 Confirm using _.
7 Dial using / BASE PRIORITY .
8 Confirm using _.
9 Press õ EDIT ENTRY .
10 Using / select the device to which you would like to
assign the priority, or select auto setting.
11 Confirm using _.

Connecting Additional Devices

Additional Devices
You can operate other devices on a telephone line, for in-
stance answering machines, modems or charge counters
Connection to the device
Connection to the Machine
You can connect additional devices directly to your ma-
chine. Plug the telephone cable of the additional device
into the B socket (RJ-11 connection) of your machine.
Connecting in Serial
We recommend direct connection to the machine
because this allows the fax switch to function opti-
mally and to control the additional devices.
Connection to the Telephone Line
Order of Connections
In order for the fax switch to function, the machine must
be first in the series if multiple devices are connected to the
same telephone socket. Follow the correct order.
Using Additional Telephones (Ea-
sylink)

Easylink

With the Easylink function, you can control your machine
with additional telephones. To use this function, addition-
al telephones must be set to tone dialling (DTMF tones);
see here the user manual of your additional telephone.
Starting Fax Reception
If you pick up on an additional device and hear that you
are receiving a fax message (whistle or silence), you can
start the fax reception by pressing *5 on the additional
telephone or the G button on the machine.
39