Resizing Objects; Cutting, Copying And Pasting Objects - Smart Technologies smart board User Manual

34

Resizing Objects

You can resize any Notebook object by dragging its resize handles until
it is the right shape and size. To maintain the original height-to-width
ratio of the object, drag one of the four diagonal resize handles located in
each corner of the selection rectangle, as shown in the figure below.
diagonal resize handles
Diagonal Resize Handles
To resize a selected object:
1. Select the object to be resized as described above.
2. Move the cursor over any of the 8 resize handles.
The cursor will change to a two-headed arrow.
3. Press, hold and drag the two-headed arrow cursor to enlarge or
contract the object.
NOTE: You can change the size of a text box, but the contents
will remain unaltered. Contracting or enlarging a text box will
only change the dimensions of the box and the way in which the
text wraps within the box. To enlarge or diminish the text,
change the font point size by clicking on the Font Size button
from the Full Toolbars or selecting Font from the Format menu,
and selecting a different point size.

Cutting, Copying and Pasting Objects

Notebook cut, copy and paste commands work much like those in other
applications. When you cut or copy a Notebook object, it is automatically
placed in the system clipboard for subsequent pasting elsewhere in the
Notebook or into other applications.
SMART Board User's Guide