Telnet - D-Link DVG-N5402G/ACF User Manual
Wireless ac1200 dual band gigabit router with fiber wan port, 3g/lte support, 2 fxs ports, 1 pstn (lifeline) port, and usb port
Hide thumbs
Also See for DVG-N5402G/ACF:
- Quick installation manual (54 pages) ,
- Quick installation manual (52 pages)
Table of Contents
Advertisement
DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Telnet
On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
To disable access via TELNET, deselect the On checkbox and click the Apply button.
To enable access via TELNET again, select the On checkbox. In the Port field, enter the number of
the router's port through which access will be allowed (by default, the port 23 is specified). Then
click the Apply button.
Figure 187. The System / Telnet page.
Page 251 of 259
Configuring via Web-based Interface
Hide quick links:
Advertisement
Table of Contents
