Section 1 - Product Overview Product Overview Package Contents • D-Link DVG-580S Wireless N Gigabit Multimedia VoIP Gateway • Non-detachable Antennas • Power Adapter • CAT5e Ethernet Cable • CD-ROM with Installation Wizard, User Manual Note: Using a power supply with a different voltage rating than the one included with the DVG-580S will cause damage and void the warranty for this product.
ULTIMATE PERFORMANCE The D-Link Wireless N Gigabit Multimedia VoIP Gateway (DVG-580S) is a draft 80.11n compliant device that delivers real world performance of up to 14x faster than an 80.11g wireless connection (also faster than a 100Mbps wired Ethernet connection).
* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental conditions will adversely affect wireless signal range. D-Link DVG-580S User Manual...
Internet Port Power Receptor The auto MDI/MDIX Internet port is Connect Ethernet devices such as Receptor for the supplied power computers, switches, and hubs. the connection for the Ethernet cable adapter. to the cable or DSL modem. D-Link DVG-580S User Manual...
A solid light indicates a proper connection to the power supply. A solid light indicates a connection to an Status LED Ethernet-enabled computer on ports 1-4. A blinking light indicates that the DVG-580S is ready. This LED blinks during data transmission. D-Link DVG-580S User Manual...
If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE software such as WinPoet, Broadjump, or Enternet 300 from your computer or you will not be able to connect to the Internet. D-Link DVG-580S User Manual...
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum - each wall or ceiling can reduce your adapter’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.
Section 3 - Configuration Configuration This section will show you how to configure your new D-Link wireless router using the web-based configuration utility. Web-based Configuration Utility To access the configuration utility, open a web-browser such as Internet Explorer and enter the IP address of the router (19.168.0.1).
Setup Wizard and skip to page 73. You may click Setup Wizard to quickly configure your router. If you want to enter your settings without running the wizard, click Manual Configuration and skip to page 17. Click Next to continue. D-Link DVG-580S User Manual...
Page 13
Create a new password and then click Next to continue. Select your time zone from the drop-down menu and then click Next to continue. Select the type of Internet connection you use and then click Next to continue. D-Link DVG-580S User Manual...
Page 14
Note: Make sure to remove your PPPoE software from your computer. The software is no longer needed and will not work through a router. If you selected PPTP, enter your PPTP username and password. Click Next to continue. D-Link DVG-580S User Manual...
Page 15
Click Connect to save your settings. Once the router is finished rebooting, click Continue. Please allow 1- minutes to connect. Close your browser window and reopen it to test your Internet connection. It may take a few tries to initially connect to the Internet. D-Link DVG-580S User Manual...
MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DVG-580S User Manual...
MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DVG-580S User Manual...
Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers: The DNS server information will be supplied by your ISP (Internet Service Provider.) D-Link DVG-580S User Manual...
Page 19
MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DVG-580S User Manual...
Page 20
Maximum Idle Enter a maximum idle time during which the Internet Time: connection is maintained during inactivity. To disable this feature, enable Auto-reconnect. DNS Servers: Enter the Primary and Secondary DNS Server Addresses (Static LTP only). D-Link DVG-580S User Manual...
Page 21
MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DVG-580S User Manual...
Router. It is not recommended that you change the default MAC address unless required by your ISP. You can use the Clone Your PC’s MAC Address button to replace the Internet port’s MAC address with the MAC address of your Ethernet card. D-Link DVG-580S User Manual...
Mixed 802.11n, 802.11b, and 802.11g - Select if you are using a mix of 80.11n, 11g, and 11b wireless clients. Mixed 802.11n and 802.11g - Select if you are using a mix of 80.11n and 80.11g wireless clients. D-Link DVG-580S User Manual...
Page 24
SSID of the DVG-580S will not be seen by Site Survey utilities so your wireless clients will have to know the SSID of your DVG-580S in order to connect to it. Wireless Refer to page 71 for more information regarding wireless security. Security: D-Link DVG-580S User Manual...
Local Domain: Enter the Domain name (Optional). Enable DNS Uncheck the box to transfer the DNS server Relay: information from your ISP to your computers. If checked, your computers will use the router for a DNS server. D-Link DVG-580S User Manual...
This feature allows the configuration of a NetBIOS ‘domain’ name under which network hosts operates. This setting has no NetBIOS Scope: effect if the ‘Learn NetBIOS information from WAN’ is activatede.” NetBIOS Node: Select the different type oif NetBIOS node; Broadcast only, Point-to-Point, Mixed-mode and Hybrid. WINS IP Enter your WINS IP address Address: D-Link DVG-580S User Manual...
If you want to assign an IP address to the MAC Address: computer you are currently on, click this button to populate the fields. Save: Click Save to save your entry. You must click Save Settings at the top to activate your reservations. D-Link DVG-580S User Manual...
Enter value (in minutes) for re-registering with the Interval: SIP server. Note! The value is set similar to the value the Service Provider specifies. However, the actual re-registering time will be the set Expiration time divided by 2. D-Link DVG-580S User Manual...
Page 29
Set whether SIP INFO body type should be DTMF- type: Relay or Telephone-Event. Default is DTMF- Relay. This determines the format of SIP INFO sent through a session. Please refer to RFC 833 to gain an understanding of the IETF specified recommendations. D-Link DVG-580S User Manual...
Section 3 - Configuration Virtual Server The DVG-5802S can be configured as a virtual server so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
Page 31
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DVG-580S User Manual...
The schedule of time when the Virtual Server Rule will be enabled. The schedule may be set to Always, which will allow the particular service to always be enabled. You can create your own times in the Tools > Schedules section. D-Link DVG-580S User Manual...
TCP or UDP, then enter the firewall (public) ports associated with the trigger port to open them for inbound traffic. The DVG-5802S provides some predefined applications in the table on the bottom of the web page. Select the application you want to use and enable it.
By default, the router automatically determines whether the underlying connection is an xDSL/Frame-relay network or some Connection Type: other connection type (such as cable modem or Ethernet), and it displays the result as Detected xDSL or Frame Relay Network. D-Link DVG-580S User Manual...
Page 35
Frame Relay Network causes the measured uplink speed to be reported slightly lower than before on such connections, but gives much better results. Detected When Connection Type is set to automatic, the automatically detected connection type is displayed here. xDSL: D-Link DVG-580S User Manual...
To find the MAC address on a computer, please refer to the Networking Basics section in this manual. DHCP Client: Select a DHCP client from the drop-down menu and click << to copy that MAC Address. D-Link DVG-580S User Manual...
Controls to only grant access to approved sites, limit web access based on time or dates, and/or block access from applications like PP utilities or games. Add Policy: Click the Add Policy button to start the Access Control Wizard. DVG-5802S Access Control Wizard Click Next to continue with the wizard. DVG-5802S D-Link DVG-580S User Manual...
Page 38
Enter the following information and then click Next to continue. DVG-5802S • Address Type - Select IP address, MAC address, or Other Machines. • IP Address - Enter the IP address of the computer you want to apply the rule to. D-Link DVG-580S User Manual...
Page 39
Protocol - Select the protocol. Dest Port Start - Enter the starting port number. Dest Port End - Enter the ending port number. To enable web logging, click Enable. DVG-5802S Click Save to save the access control rule. D-Link DVG-580S User Manual...
To use this feature, enter the text and click Save Setings. To delete the text, click Clear the List Below. Website URL/ Enter the URLs that you want to deny or allow Domain: LAN computers from accessing. DVG-5802S D-Link DVG-580S User Manual...
Inbound Filter This section will list any rules that are created. Rules List: You may click the Edit icon to change the settings or enable/disable the rule, or click the Delete icon to remove the rule. D-Link DVG-580S User Manual...
Section 3 - Configuration Firewall Settings A firewall protects your network from the outside world. The D-Link DVG-5802S offers a firewall type functionality. Enable SPI: SPI (Stateful Packet Inspection, also known as dynamic packet filtering) helps to prevent cyber attacks by tracking more state per session.
Allows devices and applications using VoIP (Voice over IP) to communicate across NAT. Some VoIP applications and devices have the ability to discover NAT devices and work around them. This ALG may interfere with the operation of such devices. If you are having trouble making VoIP calls, try turning this ALG off. D-Link DVG-580S User Manual...
A value 1 is the lowest cost and 15 is the highest cost. Select the interface that the IP packet must Interface: use to transit out of the router when this route is used. D-Link DVG-580S User Manual...
WMM is QoS for your wireless network. This will improve the quality of video and voice applications for your wireless clients. Short GI: Check this box to reduce the guard interval time therefore increasing the data capacity. However, it’s less reliable and may create higher data loss. D-Link DVG-580S User Manual...
WISH Rules are not required. WISH supports overlaps between rules. If more than one rule matches for a specific message flow, the rule with the highest priority will be used. D-Link DVG-580S User Manual...
Page 47
The rule applies to a flow of messages for which one computer’s IP address falls within the range set here. The rule applies to a flow of messages for which host’s port number is within the range set here. Host Port Range: D-Link DVG-580S User Manual...
Restore the default PIN of the router. Default: Generate New Create a random number that is a valid PIN. This becomes the router’s PIN. You can then copy this PIN to the user interface PIN: of the registrar. D-Link DVG-580S User Manual...
Page 49
PIN, or pressed a special Wi-Fi Protected Setup button on the device. The router acts as a registrar for the network, although other devices may act as a registrar as well. Add Wireless Start the wizard. Device Wizard: D-Link DVG-580S User Manual...
10 Mbps, 100 Mbps, 1000 Mbps or auto. Some older cable or DSL modems may require you to set the port speed to 10Mbps. Check the box to allow multicast traffic to pass Multicast streams: through the router from the Internet. D-Link DVG-580S User Manual...
Codec Three: Select the Codec as third priority. Packet Time: Set the Codec packet time from 10ms to 100ms from drop-down menu SIP TOS: Set RTP Type of Service value Set SIP Type of Service value D-Link DVG-580S User Manual...
Enter a name for the DVG-580S router. Enable HTTPS Enable HTTPS server for web security log in. Server: Remote management allows the DVG-5802S to be configured Remote Management: from the Internet by a web browser. A username and password is still required to access the Web-Management interface.
Used: To manually input the time, enter the values Manual: in these fields for the Year, Month, Day, Hour, Minute, and Second and then click Set Time. You can also click Copy Your Computer’s Time Settings. D-Link DVG-580S User Manual...
Facility values. Processes and daemons that have not been explicitly assigned a Facility may use any of the “local use” facilities or they may use the “user-level” Facility. Those Facilities that have been designated are with their numerical code values. D-Link DVG-580S User Manual...
Selecting this option will send the logs via email according to schedule. This option is enabled when On Schedule is selected. You can select a schedule from the list of defined schedules. To create Schedule: a schedule, go to Tools > Schedules. D-Link DVG-580S User Manual...
Any settings that have not been saved will be lost, including any rules that you have created. If you want to save the current router configuration settings, use the Save button above. Click to reboot the router. Reboot Device: D-Link DVG-580S User Manual...
You can upgrade the firmware of the Router here. Make sure the firmware you want to use is on the local hard drive of the computer. Click on Browse to locate the firmware file to be used for the update. Please check the D-Link support site for firmware updates at http://support.dlink.com.
Enter the Host Name that you registered with your DDNS service provider. Username or Enter the Username for your DDNS account. Key: Password or Enter the Password for your DDNS account. Key: Timeout: Enter a time (in hours). D-Link DVG-580S User Manual...
The Ping Test is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping. DVG-5802S Ping The results of your ping attempts will be displayed here. Results: D-Link DVG-580S User Manual...
Save Settings at the top for your schedules to go into effect. Schedule The list of schedules will be listed here. Click the Rules List: Edit icon to make changes or click the Delete icon to remove the schedule. D-Link DVG-580S User Manual...
Channel, Security Mode. Displays computers and devices that are connected to the router via Ethernet Computers: and that are receiving an IP address assigned by the router (DHCP). IGMP Multicast Displays the Multicast Group IP Address. Memberships: D-Link DVG-580S User Manual...
This option will send a copy of the router log to the email address configured in the Tools > Email screen. Save Log: This option will save the router to a log file on your computer. D-Link DVG-580S User Manual...
Section 3 - Configuration Statistics The screen below displays the Traffic Statistics. Here you can view the amount of packets that pass through the DVG-5802S on both the Internet and the LAN ports. The traffic counter will reset if the device is rebooted.
The wireless client table displays a list of current connected wireless clients. This table also displays the connection time and MAC address of the connected wireless clients. DVG-5802S WISH Sessions The WISH Sessions page displays full details of wireless clients that are connected when WISH is enabled. DVG-5802S D-Link DVG-580S User Manual...
ASCII format is provided so you can enter a string that is easier to remember. The ASCII string is converted to HEX for use over the network. Four keys can be defined so that you can change keys easily. D-Link DVG-580S User Manual...
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public key encryption system to ensure that only authorized network users can access the network. D-Link DVG-580S User Manual...
WPA-Personal Passphrase. Click Save to apply the auto-generated settings. Manually assign a network key - Allows you to go through the Wireless Security Setup Wizard and enter your settings manually. Click Next to continue. D-Link DVG-580S User Manual...
Page 69
Section 4 - Security Enter a password between 8-63 characters. Click Next, then Save to finish the Security Wizard. D-Link DVG-580S User Manual...
6. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WEP on your adapter and enter the same WEP key as you did on the router. D-Link DVG-580S User Manual...
7. Click Save Settings to save your settings. If you are configuring the router with a wireless adapter, you will lose connectivity until you enable WPA-PSK on your adapter and enter the same passphrase as you did on the router. D-Link DVG-580S User Manual...
7. Next to RADIUS Server IP Address enter the IP Address of your RADIUS server. 8. Next to RADIUS Server Port, enter the port you are using with your RADIUS server. 181 is the default port. D-Link DVG-580S User Manual...
Page 73
10. If the MAC Address Authentication box is selected then the user will need to connect from the same computer whenever logging into the wireless network. 11. Click Advanced to enter settings for a secondary RADIUS Server. 1. Click Apply Settings to save your settings. D-Link DVG-580S User Manual...
Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DVG-580S User Manual...
Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower right corner of screen). Select Connect to a network. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DVG-580S User Manual...
Page 76
It may take 0-30 seconds to connect to the wireless network. If the connection fails, please verify that the security settings are correct. The key or passphrase must be exactly the same as on the wireless router. D-Link DVG-580S User Manual...
For additional information, please refer to page 48. If you are using third party software to set up Wi-Fi Protection, carefully follow the directions. When you are finished, proceed to the next section to set up the newly-configured router. D-Link DVG-580S User Manual...
Click on a network (displayed using the SSID) and click the Connect button. If you get a good signal but cannot access the Internet, check you TCP/IP settings for your wireless adapter. Refer to the Networking Basics section in this manual for more information. D-Link DVG-580S User Manual...
XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DVG-580S User Manual...
Page 80
It may take 0-30 seconds to connect to the wireless network. If the connection fails, please verify that the WEP settings are correct. The WEP key must be exactly the same as on the wireless router. D-Link DVG-580S User Manual...
XP Wireless Utility by right-clicking on the wireless computer icon in your system tray (lower-right corner of screen). Select View Available Wireless Networks. 2. Highlight the wireless network (SSID) you would like to connect to and click Connect. D-Link DVG-580S User Manual...
Page 82
It may take 0-30 seconds to connect to the wireless network. If the connection fails, please verify that the WPA-PSK settings are correct. The WPA-PSK passphrase must be exactly the same as on the wireless router. D-Link DVG-580S User Manual...
1. Why can’t I access the web-based configuration utility? When entering the IP address of the D-Link router (19.168.0.1 for example), you are not connecting to a website on the Internet or have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself.
Page 84
• Close your web browser (if open) and open it. • Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This should open the login page for your the web management.
Page 85
NT, 000, and XP users type in cmd) and press Enter (or click OK). • Once the window opens, you’ll need to do a special ping. Use the following syntax: ping [url] [-f] [-l] [MTU value] Example: ping yahoo.com -f -l 1472 D-Link DVG-580S User Manual...
Page 86
• To change the MTU enter the number in the MTU field and click Save Settings to save your settings. • Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments of ten. D-Link DVG-580S User Manual...
Strictly adhering to the IEEE standard, the D-Link wireless family of products will allow you to securely access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking delivers.
Why D-Link Wireless? D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products. D-Link delivers the performance you need at a price you can afford. D-Link has all the products you need to build your network.
Page 89
Who uses wireless? Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, office, business, D-Link has a wireless solution for it. Home • Gives everyone at home broadband access •...
The wireless connection in public places is usually called “hotspots”. Using a D-Link Cardbus Adapter with your laptop, you can access the hotspot to connect to Internet from remote locations like: Airports, Hotels, Coffee Shops, Libraries, Restaurants, and Convention Centers.
An Infrastructure network contains an Access Point or wireless router. All the wireless devices, or clients, will connect to the wireless router or access point. An Ad-Hoc network contains only clients, such as laptops with wireless cardbus adapters. All the adapters must be in Ad-Hoc mode to communicate. D-Link DVG-580S User Manual...
Check your IP address After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Set Primary DNS the same as the LAN IP address of your router (19.168.0.1). The Secondary DNS is not needed or you may enter a DNS server from your ISP. Step 5 Click OK twice to save your settings. D-Link DVG-580S User Manual...
* Maximum wireless signal rate derived from IEEE Standard 802.11g and Draft 802.11n specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely affect wireless signal range. D-Link DVG-580S User Manual...
• Hardware Revision (located on the label on the bottom of the router (e.g. rev B)) • Serial Number (s/n number located on the label on the bottom of the router). You can find software updates and user documentation on the D-Link website as well as frequently asked questions and answers to technical issues.
Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Office. The replacement hardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the defective Hardware or any part thereof with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware.
Page 97
Software or to refund the portion of the actual purchase price paid that is attributable to the Software. Except as otherwise agreed by D-Link in writing, the replacement Software is provided only to the original licensee, and is subject to the terms and conditions of the license granted by D-Link for the Software.
Page 98
• The customer is responsible for all in-bound shipping charges to D-Link. No Cash on Delivery (“COD”) is allowed. Products sent COD will either be rejected by D-Link or become the property of D-Link. Products shall be fully insured by the customer and shipped to D-Link Systems, Inc., 17595 Mt.
Limited Warranty provides specific legal rights and you may also have other rights which vary from state to state. Trademarks: D-Link is a registered trademark of D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the property of their respective owners.
0cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. We declare that the product is limited in CH1~CH11 by specified firmware controlled in the USA. D-Link DVG-580S User Manual...
Page 101
) Ce périphérique doit accepter toute interférence, y compris les interférences pouvant perturber le bon fonctionnement de ce périphérique. The Class [B] digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation. Cet appareil numerique de la class [B] respecte toutes les exigences du Reglement sur le materiel brouilleur du Canada. D-Link DVG-580S User Manual...
Page 102
Appendix F - Registration Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 1.0 August 15, 008 D-Link DVG-580S User Manual...