D-Link DVG-N5402G/ACF User Manual page 228

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Parameter
PIN code to dial
Enable
Number
Connect after
Flash time / Flash time
minimum
When all needed settings are configured, click the Apply button.
Fill in the field to allow the user of the phone to make calls only
after dialing the PIN code.
Hotline
Select the checkbox to make the phone connected to this line dial the
number specified in the Number field after the receiver is lifted.
A number dialed by the phone connected to this line after the
receiver is lifted. Also you can specify a number in the format
phone_number@IP_address for direct IP calls bypassing the
SIP proxy server.
A time period (in seconds) between lifting up the receiver and
dialing the hotline number.
Flash time
The maximum and minimum value for flash time (the user hangs up
the receiver and lifts it again) which the router will regard as
pressing the FLASH key.
Page 228 of 259
Configuring via Web-based Interface
Description