DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
System Log
On the System / System log / Configuration page, you can set the system log options and
configure sending the system log to a remote host and/or a USB storage connected to the router.
To enable logging of the system events, select the Logging checkbox. Then specify the needed
parameters.
Parameter
Logging type
Figure 181. The System / System log / Configuration page.
Select a type of logging from the drop-down list.
Local: the system log is stored in the router's memory (and
•
displayed on the System / System log / Log page). When
this value is selected, the Server and Port fields are not
displayed.
Remote: the system log is sent to the remote host specified in
•
the Server field.
Local and remote: the system log is stored in the router's
•
memory (and displayed on the System / System log / Log
page) and sent to the remote host specified in the Server
field.
Page 241 of 259
Configuring via Web-based Interface
Description