D-Link DVG-N5402G/ACF User Manual page 163

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
When the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication type is
selected, the following fields are available:
Parameter
Encryption Key PSK
WPA Encryption
When you have configured the parameters, click the Apply button.
In addition, when the Enable client checkbox is selected, the list of available wireless networks is
displayed on the page.
To view the latest data on the available
the Wireless networks in 2.4 GHz range section.
To view the latest data on the available
the Wireless networks in 5 GHz range section.
To connect to a wireless network from the list, select the needed network. Upon that the relevant
values are automatically inserted in the Network name (SSID), BSSID, and Network
Authentication fields.
For the Open authentication type with no encryption, click the Apply button.
For the Open authentication type with encryption and the Shared authentication type, select a
needed value from the Default Key ID drop-down list. If needed, select the Encryption Key
WEP as HEX checkbox to set a hexadecimal number as a key for encryption. Then select a needed
value in the WEP key length drop-down list, fill in 4 Encryption Key WEP fields, and click
the Apply button.
For the WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK mixed authentication types, fill in
the Encryption Key PSK field and click the Apply button.
After clicking the Apply button, the wireless channel of DVG-N5402G/ACF will switch to the
channel of the wireless access point to which you have connected.
If the router is connected to the selected network successfully, the green indicator appears to the
right of the network's SSID in the table.
After configuring the device as a client, you need to create a WAN connection with relevant
parameters for the WiFiClient interface.
The step-by-step description of how to configure the router as a wireless client is available on
D-Link website. To access it, click the Configuring router in wireless client mode link in the
top part of the page.
A key for WPA encryption. The key can contain digits and/or Latin
characters.
An encryption method: TKIP, AES, or TKIP+AES.
2.4GHz band
5GHz band
Page 163 of 259
Configuring via Web-based Interface
Description
wireless networks, click the Search button in
wireless networks, click the Search button in