Telnet - D-Link DIR-806A User Manual
Wireless ac750 dual band router
Hide thumbs
Also See for DIR-806A:
- User manual (233 pages) ,
- Quick installation manual (49 pages) ,
- Quick installation manual (31 pages)
Table of Contents
Advertisement
DIR-806A Wireless AC750 Dual Band Router
User Manual
Telnet
On the System / Telnet page, you can enable or disable access to the device settings via TELNET
from your LAN. By default, access is enabled.
Figure 133. The System / Telnet page.
To disable access via TELNET, move the Enable Telnet switch to the left and click the APPLY
button.
To enable access via TELNET again, move the Enable Telnet switch to the right. In the Port
field, enter the number of the router's port through which access will be allowed (by default, the
port 23 is specified). Then click the APPLY button.
Page 170 of 180
Advertisement
Table of Contents
