D-Link DVG-N5402G/ACF User Manual page 171

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
Figure 131. The page for changing the settings of the router's port.
On the opened page, specify the needed parameters:
Parameter
Speed
Port LAN
Data transfer mode.
Select the Auto value to enable autonegotiation.
selected, the Autonegotiation modes and Flow control
sections are displayed.
Select the 10M-Half, 10M-Full, 100M-Half, 100M-Full, or
1000M-Full value to manually configure speed and duplex mode
for the selected port:
10M-Half: Data transfer in just
•
can be either sent or
of up to 10Mbps.
10M-Full: Data transfer in two directions simultaneously
•
(data can be sent and received at the same time)
maximum possible
Page 171 of 259
Configuring via Web-based Interface
Description
one direction at a time
received) at the maximum possible
rate of up to 10Mbps.
When this value is
(data
rate
at the