D-Link DVG-N5402G/ACF User Manual page 185

DVG-N5402G/ACF Wireless AC1200 Dual Band Gigabit Router
with Fiber WAN Port, 3G/LTE Support, 2 FXS Ports, 1 PSTN
(lifeline) Port, and USB Port
User Manual
The following elements are available on the page:
Parameter
IGMP
SIP
RTSP
PPPoE pass through
PPTP pass through
L2TP pass through
IPSec pass through
After specifying the needed parameters, click the Apply button.
11 On the Net / WAN page, create a WAN connection, on the Advanced / Miscellaneous page, select the SIP
checkbox, connect the phone cable between a LAN port of the router and the IP phone. Specify SIP parameters on
the IP phone and configure it to obtain an IP address automatically (as DHCP client).
Select a version of IGMP from the drop-down list to enable IGMP.
Such a setting allows using the IGMP Proxy function for all WAN
connections for which the Enable IGMP Multicast checkbox is
selected.
To disable IGMP, select the Off value from the drop-down list.
Select the checkbox to enable SIP. Such a setting allows using the
SIP ALG function. This function allows VoIP traffic to pass through
the NAT-enabled router.
Select the checkbox to enable RTSP. Such a setting allows managing
media stream: fast forward streaming audio/video, pause and start it.
Select the checkbox to enable the PPPoE pass through function.
Select the checkbox to enable the PPTP pass through function.
Select the checkbox to enable the L2TP pass through function.
Select the checkbox to enable the IPSec pass through function.
Page 185 of 259
Configuring via Web-based Interface
Description
11