Table of Contents
Advertisement
Lamp Blower Contact ECA
1.
Remove the two black M3x8 Plastite Torx screws that fasten the lamp blower contact ECA to the
top case. Then lift it out of the top case.
Assembly Notes
♦
Make sure that the pin on the inside of the top case engages the hole in the lamp blower contact
ECA.
♦
Torque the two black M3x8 Plastite Torx screws to 4 in.-lbs. (.452 Nm).
TDP-MT8 Service Guide
62
- Quick Links:
- Power and Start-Up Problems
Hide quick links:
Advertisement
Table of Contents
