Toshiba TDP-MT8 Service Manual page 23

3. Remove the four M3x8 Torx screws that fasten the optical engine to the mounting bracket.
4. Grasp the engine around the projection lens barrel. Then lift the engine up out of the case.
5. Place the engine on a static-free surface or in an ESD-protected container.
Assembly Note
♦
Make sure the engine aligns with the holes in the mounting bracket. Torque all five of the M3x8 Torx
screws to 6 in/lbs (.68 Nm).
TDP-MT8 Service Guide 23