Installing The Network Board (Axis 1611); Parts And Functions - Canon Laser Shot LBP5200 Getting Started Manual

Installing the Network Board (AXIS 1611)

Installing the optional network board (AXIS 1611) allows you to use the
LBP5200 directly over a network.
For more details on the AXIS 1611, visit the Axis Communications website
(http://www.axis.com/).
If the computers connect directly to the network board
Client
(Windows 98/Me/2000)
Client
(Windows XP /Server 2003 )
If the computers connect via a print server
Client
(Windows 98/Me/2000/XP/Server 2003)
Client
(Windows 98/Me/2000/XP/Server 2003)
Step
6
* If the print server is running Windows XP/Server 2003, you cannot
use the NetBIOS/NetBEUI protocol between the print server and
printer.
42
LBP5200
(with AXIS 1611 installed)
: NetBIOS/NetBEUI
: TCP/IP
Print Server
(Windows 98/Me/2000/XP/Server 2003*)
LBP5200
(with AXIS 1611 installed)
: NetBIOS/NetBEUI
: TCP/IP
: Protocols you can use
Confirming the Package Contents
Before installing the network board, make sure that all of the following items
are present in the package. In the rare event that any components are
missing or damaged, contact the store where you purchased the feeder.
Network Board
(AXIS 1611)
NOTE
A LAN cable is not supplied with the network board. If you are installing the
network board to connect the printer to a network, you will need a category
5 twisted pair cable. Cables, hubs, etc. should be obtained separately as
required.

Parts and Functions

a
d c b
a
Printer Connector
This is the connector that plugs into the printer. Do not touch the
connector with your fingers.
AXIS 1611
User's Manual
e