System Requirements - Canon Laser Shot LBP5200 Getting Started Manual

System Requirements

Operating System
• Microsoft Windows 98
• Microsoft Windows Me
• Microsoft Windows 2000 Server/Professional
• Microsoft Windows XP Professional/Home Edition
• Windows Server 2003
(32-bit processor version only)
Operating Environment
Windows 98/Me
Pentium 300MHz or
CPU
higher
Memory (RAM)* 64MB or more
Hard Disk
20MB or more
* As the actual amount of memory that is available for use differs depending on the
configuration of your computer system and the application you are using, printing cannot
be guaranteed in all cases in the above environments.
Recommended Environment
Windows 98/Me
Pentium III
CPU
600MHz or higher
Memory (RAM)
64MB or more
Interface
When connecting via USB
• Windows 98/Me: USB Full-Speed (USB1.1 equivalent)
• Windows 2000/XP/Server 2003: USB 2.0 Hi-Speed/USB Full-Speed (USB1.1
equivalent)
When connecting via a network (Requires the optional network board)
• Connector: 10BASE-T or 100BASE-TX
• Protocol: TCP/IP, NetBIOS/NetBEUI (Windows XP/Server 2003 only supports
TCP/IP)
NOTE
•
If you want to use the sounds from the printer driver, a PC synthesizer
(and the PCM synthesizer driver) needs to be installed in your computer.
Do not use the PC speaker driver (speaker.drv).
6
Windows 2000/XP/Server 2003
Pentium
300MHz or higher
Windows 2000: 64MB or more
Windows XP/Server 2003: 128MB or more
15MB or more
(PC/AT Compatibles)
Windows 2000/XP/Server 2003
Pentium III
600MHz or higher
Windows 2000: 128MB or more
Windows XP/Server 2003: 256MB or more
•
This printer use bidirectional communication. Operation of the printer
when connected via unidirectional communication equipment has not
been tested, and as a result, Canon cannot guarantee printer operation
when the printer is connected using unidirectional print servers, USB hubs
and switching devices.