Installing The Network Board (Axis 1611) - Canon Laser Shot LBP-2410 Getting Started Manual

Installing the Network Board (AXIS 1611)

By installing the optional network board (AXIS 1611), you can use the LBP-
2410 directly connected to the network.
For more details on the AXIS 1611, access the web site of Axis
Communications (http://www.axis.com/).
Connecting the network board on the printer directly to the computer
Client
(Windows 98/Me/2000)
Client
(Windows XP)
Connecting the printer to the computer via a print server
Client
(Windows 98/Me/2000/XP)
Client
(Windows 98/Me/2000/XP)
* When Windows XP is used as a print server, NetBIOS and NetBEUI
cannot be used as a protocol between the print server and the printer.
40
LBP-2410
(AXIS 1611 Installed)
: NetBIOS/NetBEUI
: TCP/IP
Print Server
(
Windows 98/Me/2000/XP*)
LBP-2410
(AXIS 1611 Installed)
: NetBIOS/NetBEUI
: TCP/IP
: Usable Protocols
Confirming the Package Contents
Confirm that the following items are contained in the package before
installing the network board. If an item is missing or damaged, please contact
the store where the printer was purchased.
Network Board
(AXIS 1611)
NOTE
A LAN cable is not included with this optional network board. Have
appropriate LAN cables for your network available.
Preparing a Cables
If the printer installed with the network board is going to be
connected to a network, the following LAN cables that conform
to the network will be required. Have these cables available in
advance.
I Connecting to 10Base-T Ethernet Network
It requires a UTP-category 3, 4, or 5 cable (Unshielded twisted pair cable
with RJ45 connectors attached to both ends), or an STP-category 3, 4, or
5 cable (Shielded twisted pair cable with RJ45 connectors attached to both
ends).
I Connecting to 100Base-TX Ethernet Network
It requires a UTP-category 5 cable (Unshielded twisted pair cable with
RJ45 connectors attached to both ends), or an STP-category 5 cable
(Shielded twisted pair cable with RJ45 connectors attached to both ends).
AXIS 1611
User's Manual