Loading Paper In The Multi-Purpose Tray - Canon Laser Shot LBP5200 Getting Started Manual

Loading Paper
Step 4
The standard configuration of the printer only provides the multi-purpose
tray as a paper source. By installing the optional 250-sheet paper feeder,
paper can be fed from a total of 2 paper sources.
This section only describes the procedure for loading plain paper into the
multi-purpose tray. If you want to load paper other than plain paper into
the multi-purpose tray, or you want to use the 250-sheet paper feeder,
refer to the following points.
● To load transparencies or envelopes in the multi-purpose tray.
See Chapter 2 "Loading and Collecting Paper" in the User's Guide.
● To fit the optional 250-sheet paper feeder to the printer.
Refer to "Installing the 250-sheet Paper Feeder," on p. 31.
● To load paper in the cassette of the optional 250-sheet paper feeder.
Refer to "Loading Paper into the Paper Cassette," on p. 35.

Loading Paper in the Multi-purpose Tray

The multi-purpose tray can be loaded with up to 125 sheets of paper (64 g/m
with dimensions in the range of 76.2 to 215.9 mm wide and 127.0 to 355.6 mm
long. You can also load transparencies, envelopes and other paper that cannot
be loaded in the paper cassette.
IMPORTANT
Do not place anything on the multi-purpose tray apart from the paper that
you will print on. Do not push down on the tray, or apply any unnecessary
force. Doing so may damage the multi-purpose tray.
1
Open the multi-purpose tray.
Grasp the handhold in the center of the printer, and open the multi-purpose tray.
2
Pull out the auxiliary tray.
2
)
IMPORTANT
Be sure to pull out the auxiliary tray when you load paper in the multi-
purpose tray.
Step
4
19