Canon Laser Shot LBP5200 Getting Started Manual page 21

•
Check that there is sufficient clear space between the paper limit guides
and the paper. If there is no free space, slightly reduce the amount of
paper.
•
Load the paper so that it is straight.
•
If the rear edge of the paper stack is not properly aligned, the paper may
misfeed or become jammed.
•
If the paper is curled or folded at the corners, flatten it out before loading.
•
If you use paper that has been poorly cut, the paper may have a tendency
to double-feed. In this case, thoroughly line up the edges of the paper on a
flat surface before loading it.
NOTE
To print on letterhead paper or paper with a logo already printed on it, load
the paper so that the printed side is facing up and the top of the paper is at
the far end, as shown below.
6
Slide and fit the paper guides to both sides of the stack.
: Paper Feed Direction
: Paper Feed Direction
21
Step
4