Installing the Network Board
Install the network board in the expansion slot of the printer using the following
procedure. A Phillips screwdriver is required for installing the network board. Have
a screwdriver ready in advance that matches the size of the screws.
1
Perform the following procedure.
Turn the printer OFF a.
If a USB cable is connected, turn the computer off b, and then disconnect the
USB cable c.
Disconnect the power plug from the AC power outlet d.
2
Remove the power cord.
If there is not enough space to install the network board, move the printer to a
place where you can work easier.
b
a
c
d
Network Board
8-21
8