Installing The Network Board - Canon Laser Shot LPB3500 User Manual

Installing the Network Board

Install the network board in the expansion slot of the printer using the following
procedure. A Phillips screwdriver is required for installing the network board. Have
a screwdriver ready in advance that matches the size of the screws.
NOTE
This network board does not come with a LAN cable. A Category 5 twisted pair cable is
required for installing the network board and connecting the printer to a network. Have
cables or a hub ready as needed.
1
6
2
6-34 Network Board
Turn the printer and computer OFF
, and then disconnect the power plug from the AC power
b b b b
outlet .
c c c c
a
Remove the power cord.
If there is not enough space to install the network board, move the printer to a
place where you can work easier.
, remove the USB cable
a a a a
c
b
a