Power Supply Unit (Psu) - HP ProLiant SL165s G7 Maintenance And Service Manual

Figure 32 Reinstalling the165 system board to the tray

Power Supply Unit (PSU)

Power supply unit is located on the rear panel of the server and it's a standard 750W or 1200W
PSU with PFC (power factor correction) function.
Power supply unit
Figure 33
WARNING: Take note of the following reminders to reduce the risk of personal injury from electric
shock hazards and/or damage to the equipment.
•
Installation of power supply units should be referred to individuals who are qualified to service server
systems and are trained to deal with equipment capable of generating hazardous energy levels.
•
DO NOT open the power supply unit. There are no serviceable parts inside it.
To remove the power supply:
Press the handle.
1.
Slide the power supply out of the power supply cage.
2.
Removal and Replacement Procedures 52