System Board Removal And Replacement Procedure - HP ProLiant SL165s G7 Maintenance And Service Manual

Figure 30 Replacing the battery

System Board Removal and Replacement Procedure

Remove the system board from the tray:
Remove the nine screws that secure the system board to the tray.
1.
Release the system board from the tray.
2.
Figure 31 Removing the 165 system board from the tray
To install the 165 system board:
Put the system board in the chassis. The nine screw holes on the chassis should align with the
1.
system board.
Fasten the nine screws on the system board to secure the system board to the chassis.
2.
Removal and Replacement Procedures 51