HP ProLiant SL165s G7 Maintenance And Service Manual page 54

Figure 36 System fan connection
Device number Connector
System fan 1, 2, 3, 4 J14, J12, J22 on the AC power board
System fan 5, 6, 7, 8 J19, J16, J18 on the AC power board
NOTE: A new system fan can be installed to allow the server to operate properly in case a default
system fan becomes defective.
To remove the system fan:
Squeeze the two release tabs on the system fan together to release it from the chassis.
4.
Lift the system fan away from the chassis.
5.
Figure 37 Removing the system fan
To replace the system fan:
Insert the system fan into the fan bracket.
1.
Removal and Replacement Procedures 54