System Battery - HP ProLiant SL165s G7 Maintenance And Service Manual

Align the BBWC bracket to the tray and fasten the screws.
1.
Figure 27 Installing the BBWC bracket
To install the BBWC:
Slightly press the top of the BBWC bracket as shown in step 1.
1.
Install the BBWC into the tray and slide it in the direction of the arrow.
2.
Figure 28 Installing the BBWC

System Battery

The server uses nonvolatile memory that requires 1 battery to retain system information when power is
removed.
This 3-volt lithium coin cell battery is located on the system board.
Removal and Replacement Procedures 49