Figure 1 Removing the tray with system board
To install the system tray:
Push the tray assembly into the tray bay until it stops.
1.
Figure 2 Installing the tray with system board into the chassis
Drives and Cable Management
Cable Management
Always follow good cable management practices when working inside the computer.
•
Keep cables away from major heat sources like the heat sink.
•
Do not jam cables on top of expansion cards or memory modules. Printed circuit cards are not
designed to withstand excessive pressure.
•
Keep cables clear of sliding or moveable parts to prevent cutting or crimping.
Removal and Replacement Procedures 30