Bios Update - HP ProLiant SL165s G7 Maintenance And Service Manual

3 The password may consist of up to six characters. Alphanumeric characters (A-Z, a-z, 0-9) are
recommended to avoid system error.
4 Retype the password to verify the first entry, and then press Enter.
5 Press F10 to close the Setup Utility.
6 After setting the password, Setup automatically sets the password check to Setup.
Exit Menu
Figure 54 Exit menu of the BIOS Setup Utility
Use this menu to save changes or discard changes. When you save and exit, the server reboots.
•
Save Changes and Exit --- Save the changes you have made and exit the BIOS Setup Utility. (You
can also press F10 key.)
•
Discard Changes and Exit --- Exit the BIOS Setup Utility without saving the changes you have
made. (You can also press Esc key.)
•
Discard Changes --- Discard any changes you have made. (You can also press F7 key.)
•
Restore Default Setting --- Restore the default settings for all BIOS setup fields.

BIOS Update

Perform the steps below to update BIOS:
Download the Smart Component (SPxxxxx.exe) to a directory on your hard drive.
1.
Execute (SPxxxxx.exe) and followed with direction to complete the steps. "ProLiant Flash Update"
2.
interface will appear.
Select items which need to execute:
3.
○
Create a bootable ROMPaq diskette
○
Create a bootable ROMPaq USB Key
○
Create a bootable ROMPaq CD
○
ROMPaq Diskette Flat Files
Diagnostic tools and Setup Utilities 73