Cable Management - HP ProLiant SL170s G6 Maintenance And Service Manual

To replace the system tray:
Insert the system tray into the chassis.
Figure 3 Installing the left server tray
Figure 4 Installing the right server tray

Cable management

Always follow good cable management practices when working inside the computer.
•
Keep cables away from major heat sources like the heatsink.
•
Do not jam cables on top of expansion cards or memory modules. Printed circuit cards are not
designed to withstand excessive pressure.
•
Keep cables clear of sliding or moveable parts to prevent cutting or crimping.
•
When folding a flat ribbon cable, never fold to a sharp crease. Sharp creases may damage the
wires.
•
Some flat ribbon cables come pre-folded. Never change the folds on these cables.
•
Do not sharply bend any cable. A sharp bend can break the internal wires.
Removal and replacement procedures 31