Removing An Internal Sd Card - Dell PowerEdge R830 Owner's Manual

Hide thumbs Also See for PowerEdge R830:
Table of Contents

Advertisement

Removing an internal SD card

Prerequisites
1.
Follow the safety guidelines listed in the Safety instructions section.
2.
Follow the procedure listed in the Before working inside your system section.
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
NOTE: Temporarily label each SD card with its corresponding slot number before removal. Reinstall the SD card(s) into
the corresponding slots.
Steps
Locate the SD card slot on the internal dual SD module, and press the card to release it from the slot.
Figure 61. Removing an internal SD card
1.
IDSDM
3.
SD card 2
5.
SD card slot 1
Next steps
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing an internal SD card
2.
SD card 1
4.
SD card slot 2
119

Advertisement

Table of Contents
loading

Table of Contents