Dell PowerEdge R830 Owner's Manual page 47

Viewing Integrated Devices
To view the Integrated Devices screen, perform the following steps:
1. Turn on, or restart your system.
2. Press F2 immediately after you see the following message:
F2 = System Setup
NOTE: If your operating system begins to load before you press F2, wait for the system to finish booting, and then
restart your system and try again.
3. On the System Setup Main Menu screen, click System BIOS.
4. On the System BIOS screen, click Integrated Devices.
Related links
Integrated Devices
Integrated Devices details
Integrated Devices details
The Integrated Devices screen details are explained as follows:
Option Description
USB 3.0 Setting Enables or disables the USB 3.0 support. Enable this option only if your operating system supports USB 3.0.
If you disable this option, devices operate at USB 2.0 speed. USB 3.0 is enabled by default.
User Accessible Enables or disables the USB ports. Selecting Only Back Ports On disables the front USB ports, selecting All
USB Ports Ports Off disables all USB ports. The USB keyboard and mouse operate during boot process in certain
operating systems. After the boot process is complete, the USB keyboard and mouse do not work if the
ports are disabled.
Internal USB Port Enables or disables the internal USB port. This option is set to Enabled by default.
Integrated RAID Enables or disables the integrated RAID controller. This option is set to Enabled by default.
Controller
Integrated Network Enables or disables the integrated network card.
Card 1
Embedded NIC1
and NIC2
Enables or disables the Embedded NIC1 and NIC2 options. If set to Disabled, the NIC may still be available
for shared network access by the embedded management controller. The embedded NIC1 and NIC2 options
are only available on systems that do not have Network Daughter Cards (NDCs). The Embedded NIC1 and
NIC2 option is mutually exclusive with the Integrated Network Card 1 option. Configure the Embedded NIC1
and NIC2 option by using the NIC management utilities of the system.
I/OAT DMA Engine Enables or disables the I/OAT option. Enable only if the hardware and software support the feature.
Embedded Video Enables or disables the Embedded Video Controller option. This option is set to Enabled by default.
Controller
Current State of Displays the current state of the embedded video controller. The Current State of Embedded Video
Embedded Video Controller option is a read-only field. If the Embedded Video Controller is the only display capability in the
Controller system (that is, no add-in graphics card is installed), then the Embedded Video Controller is automatically
used as the primary display even if the Embedded Video Controller setting is set to Disabled.
SR-IOV Global Enables or disables the BIOS configuration of Single Root I/O Virtualization (SR-IOV) devices. This option is
Enable set to Disabled by default.
NOTE: Selecting Only Back Ports On and All Ports Off disables the USB management port and
also restricts access to iDRAC features.
NOTE: The Embedded NIC1 and NIC2 options are only available on systems that do not have
Integrated Network Card 1.
47