Installing An Expansion Card Into Expansion Card Riser 3 - Dell PowerEdge R830 Owner's Manual

3. expansion card connector
Figure 58. Removing a full-height expansion card from the expansion card riser 3
1. expansion card holder
3. expansion card connector
Next steps
1. Install the expansion card riser 3.
2. Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system

Installing an expansion card into expansion card riser 3

After working inside your system
Installing an expansion card into expansion card riser 3
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support
team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety
instructions that are shipped with your product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Remove the expansion card riser 3.
116
4. expansion card riser
2. expansion card
4. expansion card riser 3