Dell PowerEdge R830 Owner's Manual page 150
Hide thumbs
Also See for PowerEdge R830:
- Getting started (8 pages) ,
- Quick start manual (8 pages) ,
- Getting started with your system (8 pages)
Table of Contents
Advertisement
CAUTION: Do not lift the system board by holding a memory module, processor, or other components.
2.
Hold the system board holder, lift the blue release pin, lift the system board, and then slide it toward the front of the chassis.
Sliding the system board toward the front of the chassis disengages the connectors from the back of the chassis slots.
3.
Lift the system board out of the chassis.
Figure 93. Removing the system board
1.
thumb screw
3.
system board
Next steps
1.
Install the system board.
2.
Follow the procedure listed in the After working inside your system section.
Related links
Safety instructions
Before working inside your system
Installing the system board
After working inside your system
150
2.
system board holder
Advertisement
Table of Contents
Troubleshooting
