Remote Controller Service Mode - Daikin VRV K Manual

SI-95.BOOK Page 71 Friday, March 31, 2000 10:59 AM
Si-95

1.15 Remote Controller Service Mode

How to Enter the
Service Mode
Service Mode
1. Select the mode No.
Operation Method
Set the desired mode No. with the
(Forced FAN ON "43" only can be set by wireless remote controller.)
2. Select the unit No. (For group control only)
Select the indoor unit No. to be set with the time mode
(Selected the unit No. with
3. Make the settings required for each mode. (Modes 41, 44, 45)
Before setting, press
("Code" will flush on L. C. Display.)
For details, refer to the table next page.
4. Define the setting contents. (Modes 44, 45)
Define by pushing the timer
(After defining, "Code" will change from flushing to ON.)
5. Return to the normal operation mode.
Push the
Test Operation Inverter K Series
button.
button for wireless remote controller)
button and make condition to change setting.
button.
button one time.
Test Operation
71