Centralized Control Group No. Setting - Daikin VRV K Manual

SI-95.BOOK Page 63 Friday, March 31, 2000 10:59 AM
Si-95

1.11 Centralized Control Group No. Setting

I
I
1. When in the normal mode, push the
2. Set mode No. "00" with the
3. Push the
4. Set the group No. for each group with the
5. Push the timer
6. Push the
I
I
Test Operation Inverter K Series
If carrying out centralized control by central remote controller or unified ON/OFF controller, group No.
must be set for each group individually by remote controller.
Group No. setting by remote controller for centralized control
the "field setting mode."
button. ∗
button to inspect the group No. display.
1-01, ...,1-15, 2-00,...4-15. However, the unified ON/OFF controller displays only the group No. within
the range selected by the switch for setting each address.)
button to define the selected group No.
button to return to the normal mode.
Even if not using a remote controller, connect the remote controller when setting the group No., set the
group No. for centralized control, and disconnect after making the setting.
Set the group No. after turning on the power supply for the central remote controller, unified ON/OFF
controller, and indoor unit.
button for 4 seconds or more, and operation then enters
button (The group No. increases in the manner of 1-00,
Test Operation
63