Denso BHT-805BW Operator's Manual page 27

Charging with the battery charger (CH-201A)
1
Check the
terminals and insert the cartridge.
2
Connect the power cable to the
CH-201A and connect the plug to a
commercial AC power source (100
V AC).
The LED will turn red when charging is
commenced.
3
The LED will
charging is complete.
Point
Charging takes approximately 3 hours.
An only slightly discharged battery
cartridge should take this time to
become fully charged.
4
Slide the battery cartridge cover
release button (1) in the direction
indicated by the arrow and remove
the battery cartridge cover (2).
battery cartridge
turn OFF when
13
Step 1 Charging
Terminals
Red LED ON
OFF